Due to personal reasons the time has come for me to pass the torch on.
You are looking at one set of official self-build plans for
a Farrier f-41 Catamaran (and the registered F-41 Sail Number: 39) with some
fabricated parts included. The Sail Number: 39 would after purchase be transferred
to the new owner by contacting Farrier International (https://f-boat.com/).
The Farrier F-41 is fast, safe ‘blue water’ performance cruising
catamaran that has a proven track record in previous builds. The self-build
pans are detailed enough for amateur builders to be able to build, or
alternatively pass the drawings on to a boat builder that can do the work for
L.O.A……………… 41’ 8’’ – 43’ (12.7 – 13.1m)
B.O.A………………23’ 1’’ (7.04m)
L.W.L………………39’ 5’’ (12.0m)
Full Load. Displ (at DWL) ………………16,900lbs (7680kg)
Sail Area (main & jib) ……………… 939sq.ft (87.2sq.m.)
Draft (board up) ………………1’ 10’’ (0.56m)
Draft (board down) ……………… 7’ 4’’ (2.24m)
Drawings is for either Foam, Duracore or Cedar (depending on
preference) and comes with multiple configuration options to make sure you can
build against a design that works best for yourself. For example – For rudders,
single pivot, double pivot or fixed/kick up underhung can be chosen. Lower hull
for performance or more headroom for cruising and family space. Etc.
Included (full set of original self-build plans):
Blue 3 ring Binder with sheets i-vi and 1-72 (Step by step
illustrated building instructions and measurements)
Full Size Patterns 1-36 (this is scale 1:1 A3 machine
printed drawings that outlines the shapes of all the parts).
Fabricated parts manual (machine drawings with all machine
parts and measurements)
Additional booklets and information around vacuum bagging techniques.
Fabricated Parts (During build I had some of the technical
parts done (see photo), they are included with the plans):
1 x Mast Step Pivot Ball
1 x Mast Base Pivot Ball Bearing
1 x Mast Base Pivot Ball Socket
1 x Mast Step Base Plate
8 x Rudder Transom Brackets (+8 x Rudder Transom Backing
2 x Rudder Inner Gudgeon Plates
2 x Rudder Outer Gudgeon Plates
4 x Rudder Pivot Links
4 x Rudder Sleeve Pivot Plates
2 x Rudder Sleeve Pivot Boss Assembly
1 x Bow Beam Brace Support + Spreader Top Plate
2 x Daggerboard Case Stop
2 x Daggerboard Case Cheek Block Mounting Plate
2 x Shroud Chain-plates
Note: This is not for an actual physical catamaran
for sale but instead for the official self-build plans for a Farrier f-41 Catamaran
and the registered F-41 Sail Number: 39 (and fabricated parts as shown in
Postage: Build Plans and Parts will be posted to UK address as ‘free postage’ (in other words, I will arrange delivery and take the cost for this).
Any questions feel free to ask.
Current Price: £4100.00
This Diy Self-build Plans For A Farrier F-41 Catamaran boat is located in Welshpool, Middletown, SY21 *** and is being sold on eBay by mr_loman.