Bilge keel Pandora 700 25ft by Rydgeway marine UK
Purchased earlier this year for double the asking price but my
circumstances have now changed so I no longer can put reattach the final parts
to make it seaworthy once again.
In order to get the boat on the water the following needs to
be carried out:
Shaping and fitting of the new rudder to the
skeg and bolts refitted with lower casting (lower skeg fitting and rudder
Antifoul applied to the hull and keels ( I have ¾
of a tin for this). Fill any scuffs with epoxy filler. The most recent photos show the boat with the hull rubbed
down and keels having the paint and corrosion removed practically ready for a
Engine minor service, engine can be seen running
This is a very rare example of a Pandora 700, it has a
fitted 12hp inboard engine which is running and parts for these engines are
available from the original company. The engine benefits from a wet exhaust
which makes it sound very quiet and helps it to run more efficiently. There is
a drop out at the rear for an outboard as well. I have a whole booklet regarding
the inboard including useful schematics.
The sails are in serviceable condition as seen in the photos
and there is a receipt for a little used genoa in the folder.
Please note that the first photo is the boat when I picked it up in Anglesey and before I sanded down the hull and keels. It just gives an idea of what it should look like with the mast up.
I have spent a lot of money getting all the parts ready for
the boat including £140 just for the raw material, Iroko, for the rudder and £100
for the lower aluminium casting for the skeg. The rudder was cut on a cnc
machine and dimensioned based on the old rudder. It has some flash surrounding so
that it can be sanded to the required fit.
Here is a list of parts found on the boat:
Fully working speed and depth log by NASA marine
Selva VHF set working
20W solar panel and new YUSA battery bank
Internal 70L water tank
Sliding kitchenette unit with sink and 2 burner hob
Radio unit for music
Internal toilet with pump unit.
4 berths in 1 cabin
V-berth (converts to double with infill)
forwards with escape hatch over
Single settee berth
Single quarter berth
Original gelcoat finish throughout cabin interior
in very good condition
I have a folder full of receipts and useful schematics for
the boat including a boat survey. There is an active Pandora 700 association in
the UK with regular meets and regattas.
Lifting can be arranged on my side for a small fee. I
transported it back to Cardigan from North Anglesey and had a competitive price
off a professional courier. I can ask for quotes for dropping the boat off if required but would require lifting at the other side.
Price of boat does not include transport.
Genuine reason for sale and priced to sell. Any questions
please ask. Boat is located in West Wales near to Cardigan. Please no
Current Price: £1000.00
This Pandora 700 25ft Sailing Yacht boat is located in Llandyssul, SA446PG and is being sold on eBay by glawty5.