1980 23ft GRP Fin keel cruising yacht with 5 berths and 6ft headroom! This lovely little boat has had an extensive refit over the last 4 years and must be the finest one around. Re-engined with a refurbished Yanmar GM10 from Marine Enterprises Dorset – less than 30 hours since installation.Original gelcoat, epoxy treated under water, B&G Chartplotter, DSC VHF,Lying out of the water at Portland.
Length: 23ft / 7mWaterline length: 19.9ft / 6.1mBeam: 8.4ft / 2.6mDraft: 4ft / 1.2mWeight: 4409Lbs / 2000Kg
Details of extensive work carried out on this lovely boat by the current owner:Keel off, re-bedded with new keel studs, nuts and plates.Skeg off, re-bedded with new nuts and bolts.New stern tube and cutlass bearing.New 3 bladed prop matched to the hull shape and engine power by Michigan Wheel.Wooden rubbing strake removed, re-bedded and new screws.New tiller carved in ash wood.New rudder stock top bearing designed and installed – there was no bearing in the original.All windows replaced.New Bainbridge Ocean 50 hatch fitted on foredeck.New spray hood frame and spray hood designed and installed.New standing rigging (purchased in 2017)New running rigging (2020)New garage for saloon hatch designed and installed.New aft stainless steel cleats.New cheek blocks.New engine hatch cover.All sea cocks replaced.Re-engined with a refurbished Yanmar GM10 from Marine Enterprises Dorset – less than 30 hours since installation.New hard wood engine beds.New flexible freshwater tank and all pipework.New electric water pump.New 8mm gas pipe to stove.New gas alarm and fire extinguisher.New solar panel and charge controller.2 batteries with charge splitter.Completely rewired and new switch panel installed.All lights, domestic and navigation, are new LEDs.New NMEA digital backbone to support B&G Vulcan 7 chart plotter with wind, log and depth transponders. New depth transponder installed on the centre line just ahead of the keel.Completely re-upholstered.New head lining through out.New carpet in saloon.New sea toilet.New auto bilge pump.New cutter rig installed (sailing as a cutter or sloop is optional) with new laminated mahogany spar.New sail cover.New swim platform.
Re-engined with a refurbished Yanmar GM10 from Marine Enterprises Dorset – less than 30 hours since installation.Shaft drive.3 bladed fixed prop.
2 x 12v battery.LED Cabin lighting.LED Nav lights.
Spars, rigging, sails and other
Slab reefing Main (2003).Crusader furling Genoa (2008). Modified 2019.New standing rigging (purchased in 2017)New running rigging (2020)New cutter staysail (Moatt sails) (2019)
6ft / 1.8m headroom
5 berths.Forward cabin with v berth.Heads with sea toilet.Hanging locker.Main saloon with dinette/double berth.Galley with 2 burner stove with grill, sink.Quarter berth.New upholstery throughoutNew headlining throughout
Navigation equipment: B&G Vulcan Chartplotter/GPSPlastimo Conquest Compass.
Safety equipment: Horseshoe LifebuoyManual Bilge pump.Auto Electric Bilge pump 2019Fire Extinguisher 2020Gas alarm 2020.
Deck equipment: Danforth type anchor with chain and warp.Bathing platform with Boarding ladder.Boathook.Fenders and warps.New Sail cover.New sprayhood
For more details, call us on 07975 521 792 or email email@example.com
Current Price: £6500.00
This Virgo Voyager 23ft Sailing Boat Yacht boat is located in Weymouth, DT5 *** and is being sold on eBay by coveyachts1.